Brembo
Brembo
Sort by
Show result
  • Piston diameter: 14mm
  • Lever Ratio: 16-18mm
  • Lever Type: LL
  • Type: Radial
  • Material: F.AL
  • Surface Protection: HA
  • Weight: 350g
  • Brake Light Micro-Switch: NO
  • Handlebar Fixing: 22.2mm
  • Brake Fluid: DOT 4
RM1,198.00
  • Piston diameter: 16mm
  • Type: Radial
  • Weight: 350g
  • Brake Light Micro-Switch: NO
  • Handlebar Fixing: 22.2mm
  • Brake Fluid: DOT 4
RM1,398.00
  • Piston Diameter: 16mm
  • Lever Ration: 16mm/18mm (adjustable)
  • Lever Type: LL
  • Type: Radial
  • Material: Forged Aluminum
  • Finishing: Hard Anodized
  • Weight: 350gr
  • Brake Microswitch: No
  • Handlebar Fixing: 22.2mm
  • Brake Fluid: DOT4
RM1,198.00
  • Piston: 17mm 
  • Lever Ratio: 16-18mm
  • Lever Type: LL
  • Type: Radial
  • Material: F.AL
  • Surface Protection: HA
  • Weight: 350g
  • Brake Light Micro Switch: NO
  • Handlebar Fixing: 22.2mm
  • Brake Fluid: DOT 4
RM1,198.00

The Brembo Corsa Corta Master Cylinder thrives. It features three different bite-point settings: Normal, Sport and Race.

In the Normal setting, the bite point starts more gradually, making it ideal for city riding, touring or braking in poor grip conditions.

In the Sport setting, the beginning of the bite point is shorter than in the Normal setting. This setting produces a more dynamic response suitable for sportier riding.

In the Race setting, the position of the cam mechanism shortens the initial stage of the bite-point even further to produce the same immediate response of the master cylinders used in MotoGP. This allows the rider to reach the bite-point almost instantaneously and makes this setting ideal for use on the race track.

This adjustability combined with the MotoGP-derived RCS system allows the Corsa Corta to go anywhere and brake confidently no matter how or where you ride.

The Brembo RCS System allows the rider to choose between more power or more precision to best complement their riding style, track/street conditions and other brake components. The unique design of the RCS system offers the flexibility to change the brake lever ratio at the turn of a screw. The 20mm setting provides a more reactive braking response and the 18mm setting allows for better feel and modulation. Additionally, the Brembo lever features an adjustable thumb screw that can be customized to fit a range of riders’ hands. In the event of a crash, the outer portion of the lever folds up and away to avoid damage. The patented master cylinder is constructed of forged aluminum and then CNC machined down to remove any excess weight. All of its components, including the piston, seals and pushrod, are the same as those used in MotoGP and WSBK.

Features:
Adjustable bite-point
Race, Sport and Normal settings
RCS (Ratio Click System)
Forged aluminum body
Hard anodized finish
Adjustable and folding aluminum lever
Large 19mm piston
Brake fluid: DOT 4
Mounts to most 22mm (⅞) diameter handlebars
Includes universal brake light switch
Includes double banjo bolt (M10x1.0)
Brembo Brake Reservoir Kit available (sold separately)
Brembo Remote Adjuster available (sold separately)
Compatible with most OEM ABS brake systems

RM1,398.00

The Brembo 19RCS Master Cylinder is optimized for dual-caliper, four-piston braking systems. It utilizes a massive 19mm piston that provides the maximum amount of stopping power possible.

The Brembo RCS Brake Master Cylinder allows the rider to choose between more power or more precision to best complement their riding style, track/street conditions and other brake components. The unique design of the RCS system offers the flexibility to change the brake lever ratio at the turn of a screw. The 20mm setting provides a more reactive braking response and the 18mm setting allows for better feel and modulation. Additionally, the Brembo lever features an adjustable thumb screw that can be customized to fit a range of riders’ hands. In the event of a crash the outer portion of the lever folds up and away to avoid damage. The patented master cylinder is constructed of forged aluminum and then CNC machined down to remove any excess weight. All of its components, including the piston, seals and pushrod, are the same as those used in MotoGP and WSBK.

Features:
Forged aluminum body
Hard anodized finish
Adjustable and folding aluminum lever
Large 19mm piston
Lever ratio of 18mm and 20mm
Weight: ~350 gr
Brake fluid: DOT 4
Mounts to most 22mm (⅞) diameter handlebars
Includes universal brake light switch
Includes double banjo bolt (M10x1.0)
Brembo Brake Reservoir Kit available (sold separately)
Brembo Remote Adjuster available (sold separately)
Compatible with most OEM ABS brake systems

RM1,198.00
  • Piston Diameter: 19mm
  • Lever Ration: 18mm/20mm (adjustable)
  • Material: Forged Aluminum
  • Lever Type: LL
  • Type: Radial
  • Finishing: Hard Anodized
  • Weight: 350gr
  • Brake Microswitch: No
  • Handlebar Fixing: 22.2mm
  • Brake Fluid: DOT4
RM1,088.00
  • Weight reduced, 10% lighter than the M4 monoblock
  • Cooling ribs so the calipers surface increases 30% for better heat removal
  • Better stiffness by ribs
  • Better stiffness by ribs
  • Z04 racing pads optional
  • New level in braking performance and controll
  • One peace caliper
  • 108 mm wheelbase
  • 4 x 30 mm pistons
  • Piston diameter xx mm
  • Pistion with sealing
  • Brake rime size 32-34 mm
  • Offset 22,5 mm
  • No brake pad pin necessary
  • Anti vibration spring for the brake pads
  • Brake fluid: DOT 4
  • Brembo Logo red hand painted
RM3,298.00
  • CNC machined billet aluminum
  • Nickel plated coating
  • 2-piece caliper design
  • Hand painted embossed Brembo logo
  • Four 32mm aluminum pistons
  • Weight without pads: ~1000 gr
  • Compatible disc height: 32-34mm
  • Brake fluid: DOT 4
  • Compatible with OEM Brembo, SuperSport and T-Drive rotors
  • Brembo Caliper Spacer Kits available (sold separately)
  • Sold as a pair

Note: Additional Brembo Caliper Spacer Kit may be required to install these calipers, please reference the fitment chart below for further details.

RM5,950.00
  • CNC machined billet aluminum
  • Nickel plated coating
  • 2-piece caliper design
  • Hand painted embossed Brembo logo
  • Four 32mm aluminum pistons
  • Weight without pads: ~1000 gr
  • Compatible disc height: 32-34mm
  • Brake fluid: DOT 4
  • Compatible with OEM Brembo, SuperSport and T-Drive rotors
  • Brembo Caliper Spacer Kits available (sold separately)
  • Sold as a pair

Note: Additional Brembo Caliper Spacer Kit may be required to install these calipers, please reference the fitment chart below for further details.

RM5,950.00

The Brembo M4 Calipers is an entry level caliper in Brembo’s lineup that brings MotoGP derived monoblock technology within the reach of all motorcycle enthusiasts. The monoblock design allows the caliper to be finished as a single piece, making it incredibly lightweight with unrivalled stiffness and precision. The hydraulic system has been painstakingly optimised, and the use of 34mm diameter pistons has further increased its renowned power and controllability. Retaining each brake pad are special guides built within the caliper allowing for extremely quick and easy brake pad replacement. By upgrading to a Brembo caliper, you will be rewarded with a dramatic improvement in stopping power, consistency and brake feel.

Since its introduction, the Brembo M4 has become one of the most popular brake caliper options thanks to its cost and performance benefits. Many major motorcycle manufacturers from Europe and Japan have begun equipping M4 Calipers as standard equipment on their motorcycles. For years, the legendary circuits of MotoGP and the World Superbike Championship have been dominated by teams using Brembo braking systems, demonstrating the technological supremacy and unparalleled experience of the Italian brand.

Features:
Cast aluminum construction
Titanium anodized finish
Single piece monoblock design
Hand painted embossed Brembo logo
Four 34mm aluminum pistons
Weight without pads: ~800 gr
Compatible disc height: 32-34mm
Brake fluid: DOT 4
Compatible with OEM Brembo, SuperSport and T-Drive rotors
Brembo Caliper Spacer Kits available (sold separately)
Sold as a pair

Includes:
2 x Brembo M4 Caliper
2 x Brembo sintered brake pads
2 x Banjo bolts
4 x Copper crush washers
2 x Thermal sensitive caliper tape
User’s manual

RM2,750.00

The Brembo M4 Calipers is an entry level caliper in Brembo’s lineup that brings MotoGP derived monoblock technology within the reach of all motorcycle enthusiasts. The monoblock design allows the caliper to be finished as a single piece, making it incredibly lightweight with unrivalled stiffness and precision. The hydraulic system has been painstakingly optimised, and the use of 34mm diameter pistons has further increased its renowned power and controllability. Retaining each brake pad are special guides built within the caliper allowing for extremely quick and easy brake pad replacement. By upgrading to a Brembo caliper, you will be rewarded with a dramatic improvement in stopping power, consistency and brake feel.

Since its introduction, the Brembo M4 has become one of the most popular brake caliper options thanks to its cost and performance benefits. Many major motorcycle manufacturers from Europe and Japan have begun equipping M4 Calipers as standard equipment on their motorcycles. For years, the legendary circuits of MotoGP and the World Superbike Championship have been dominated by teams using Brembo braking systems, demonstrating the technological supremacy and unparalleled experience of the Italian brand.

Features:
Cast aluminum construction
Titanium anodized finish
Single piece monoblock design
Hand painted embossed Brembo logo
Four 34mm aluminum pistons
Weight without pads: ~800 gr
Compatible disc height: 32-34mm
Brake fluid: DOT 4
Compatible with OEM Brembo, SuperSport and T-Drive rotors
Brembo Caliper Spacer Kits available (sold separately)
Sold as a pair

Includes:
2 x Brembo M4 Caliper
2 x Brembo sintered brake pads
2 x Banjo bolts
4 x Copper crush washers
2 x Thermal sensitive caliper tape
User’s manual

RM2,789.00

The Brembo M50 Caliper features a refined and compact monoblock body that was designed to guarantee excellent power and braking modulation. Monoblock braking technology was originally introduced by Brembo to MotoGP in the early 90s with great success. Since then Brembo has continued to push the performance envelope - the M50 Caliper is no exception. Its single piece cast aluminum body and triple bridge design ensures absolute stiffness under the heaviest of braking. The four 30mm pistons make it possible for the caliper to transmit more precise feedback to the master cylinder, brake lever and the rider’s fingers.

Each M50 Caliper weighs only ~700 gr (1.54 lb). This is possible thanks to the use of topological optimisation software which allows Brembo to remove any excess material without compromising the caliper’s structural integrity. The titanium anodized finish helps dissipate heat built up under hard and extensive braking. Seating the brake pads are special guides that eliminate the need for brake pad pins, making it quick and simple to swap brake pads at home or in the pits.

Features:
Cast aluminum construction
Titanium anodized finish
Single piece monoblock design
Hand painted embossed Brembo logo
Four 30mm aluminum pistons
Weight without pads: ~700 gr
Compatible disc height: 32-34mm
Brake fluid: DOT 4
Compatible with OEM Brembo, SuperSport and T-Drive rotors
Sold as a pair

Includes:
2 x Brembo M50 Caliper
2 x Brembo sintered brake pads
4 x Copper crush washers
2 x Thermal sensitive caliper tape
User’s manual

RM3,298.00
  • Caliper body 9% lighter with the same rigidity.
  • Assembled caliper 7% lighter.
  • Lower caliper mounts with shorter bolts.
  • Up to a 10% reduction of brake fluid temperature (in the tested applications).
  • Innovative central bridge opening that favours air output.
  • Larger air passages around the pistons.

Sold as a pair

Includes:
2 x Brembo Stylema Caliper
2 x Brembo sintered brake pads
 

RM3,787.00
  • Reservoir mounting kit for RCS radial master cylinder.
  • Can be used with any master cylinder that has a vertical split where the clamp mounts the master cylinder to the handlebar.
RM290.00
  • Forged aluminum body
  • Hard anodized finish
  • Adjustable and folding aluminum lever
  • 15mm piston
  • Lever ratio of 18mm and 20mm
  • Weight: ~350 gr
  • Brake fluid: DOT 4
  • Mounts to most 22mm (⅞) diameter handlebars
  • Includes universal brake light switch
  • Brembo Brake Reservoir Kit available (sold separately)
  • Brembo Remote Adjuster available (sold separately)
  • Compatible with most OEM ABS brake systems
RM1,198.00
  • Forged aluminum body
  • Hard anodized finish
  • Adjustable and folding aluminum lever
  • Large 17mm piston
  • Lever ratio of 18mm and 20mm
  • Weight: ~350 gr
  • Brake fluid: DOT 4
  • Mounts to most 22mm (⅞) diameter handlebars
  • Includes universal brake light switch
  • Brembo Brake Reservoir Kit available (sold separately)
  • Brembo Remote Adjuster available (sold separately)
  • Compatible with most OEM ABS brake systems
  • Ideally mated to work with the Brembo M50 Brake Calipers
  • OE on the Ducati 1199 Panigale
RM1,198.00